News

  • 2015-03-05 10:09:12
    The release agent in the pultrusion process has many advantages and the selection of release agent for pultrusion process.……[more]
  • 2015-03-03 09:39:25
    In the forming process of the pultrusion production, between the product and mould surface, the adhesive force is very strong. In addition, from the material into the mouth of pultruded mold, with the rising of temperature, resin viscosity decreased, ……[more]
  • 2015-03-02 15:18:14
    With the development of national economic construction, industrial water use increased dramatically. The promotion of cooling tower, the realization of industrial and cooling water circulation use, is of great practical significance to water saving, p……[more]
  • 2015-02-28 09:25:08
    Fiberglass rebar production uses pultrusion molding process. It's mainly longitudinal enhancement. Fiber content is 50% ~ 65%. In the past 10 years, fiberglass reinforced rebar has effectively replaced steel rebar in many projects, especially with the……[more]
  • 2015-02-27 09:25:04
    As we all know, fiberglass pultruded profiles have obvious advantages. For example, light weight but super strong, they'll never rust or rot, and there are a variety of colors can be chosen from, etc. Today we'll introduce more detailed advantages. Co……[more]
  • 2015-02-26 09:08:04
    FRP handrail is combined by fiberglass pultruded profiles and SMC/BMC products to have the function of protection. Fiberglass pultruded handrail is light weight but high strength, aging resistance, strong corrosion resistance, it wion't rust, long ser……[more]
  • 2015-02-25 11:27:11
    One of the most dangerous safety problems in the field of public facilities is the top of the power pole fire, the risk increases or decreases depend on the wire and rod material. Some of the public service corporation has fiberglass pultruded cross ……[more]
  • 2015-02-23 09:56:14
    FRP pultruded profile cracks, including appearance and inner crack. It can appear in any goods and any moment.The reason is mainly because of the crack onset exothermic shorter episodes of heat stress. There are many manufacturers also agreed on this ……[more]
  • 2015-02-22 09:37:26
    dry winding: It adopts the pre dipping treatment of prepreg or belt,the winding machine by heating and softening to viscous flow state after wound on a mandrel. Because of the prepreg (or belt) is a professional production, strictly control the resin ……[more]
  • 2015-02-21 09:10:59
    Filament winding forming process is soaked continuous fiber resin solution (or fabric,prepreg) according to certain rules of winding to the core mould, and then after curing and demolding to obtain product. According to the physical and chemical state……[more]